Setting display power saving
In order to conserve energy, the display backlight can be set to dim if no operation is conducted for a
specific amount of time.
1. On the Home Screen, use the (selection) dial to select (SYSTEM) and press the
(ENTER) button.
This opens the System Settings Screen.
2. Use the (selection) dial to select “Power” and press the (ENTER) button.
3. Use the (selection) dial to select “Power Saving” and press the (ENTER) button.
4. Use the (selection) dial to select an item and press the (ENTER) button.
Setting value Explanation
Off The display backlight always stays bright.
30 sec, 1 min, 3 min, 5 min The display backlight will become dark after the set time has elapsed
without any operation.
136
To Next Page
Loading...
