Making output settings
Adjusting the USB output level
The level output by USB to the computer, smartphone or tablet can be adjusted.
1. On the Home Screen when in audio interface mode, use the (selection) dial to select
(Output) and press the (ENTER) button.
This opens the Output Settings Screen.
2. Use the (selection) dial to select “USB Send Volume” and press the (ENTER) button.
3. Use the (selection) dial to adjust the USB output level and press the (ENTER) button.
The output level meters can be checked while adjusting.
NOTE
This setting does not affect the recorded audio or the audio levels output from the headphone jack or the
LINE OUT jack.
HINT
• This can be set to “Mute” or from −40 to +40.
• Selecting “Mute” silences the output from the USB port.
110
To Next Page
Loading...
