Pausing recording
By pausing recording and not recording unwanted intervals, microSD card capacity can be conserved.
1. Press the (PLAY/PAUSE) button when recording.
This pauses recording.
Press the (PLAY/PAUSE) button again to resume recording.
NOTE
Resuming recording will automatically add a mark at that point.
Adding marks during recording
Marks can be added to files while recording.
Added marks are shown on the Playback Screen, and the (REW) and (FF) buttons can be used to
move the playback position to marks.
1. While recording, use the (selection) dial to select (MARK) in the Menu bar and press
the (ENTER) button.
This will add a mark at the position of the current elapsed recording time.
NOTE
A maximum of 99 marks can be added to a single file.
84
To Next Page
Loading...
