Setting the type of batteries used (first time starting up)
Set the type of batteries used in the H5studio when a screen to set it is shown after setting the date and
time the first time the power is turned on after purchase or after the H5studio has been reset to factory
defaults. This is necessary to accurately show the remaining battery charge on the screen.
1. Use the (selection) dial to select the battery type and press the (ENTER) button.
Setting value Explanation
Alkaline Alkaline batteries
Ni-MH Nickel-metal hydride batteries
Lithium Lithium batteries
After first-time settings are complete, the Home Screen will open.
HINT
• The battery type setting can be changed later on the Setting Screen. (→Setting the type of batteries used)
• Use the (selection) dial to select and press the (ENTER) button to return to the
previous setting screen.
46
To Next Page
Loading...
