Zoom H5studio - Linking Gain Knobs

Linking gain knobs
On the H5studio, the gain controls can be set to be linked for the L and R channels of the mic capsule as
well as for INPUT 1 and INPUT 2.
1. On the Home Screen, use the (selection) dial to select (INPUT) and press the
(ENTER) button.
This opens the Input Settings Screen.
2. Use the (selection) dial to select an input for gain knob linking and press the (ENTER)
button.
3. Use the (selection) dial to select “LR Gain Knob Link” or "1&2 Gain Knob Link" and press the
(ENTER) button.
4. Use the (selection) dial to select “On” or “Off” and press the (ENTER) button.
62