Setting the date format (first time starting up)
Set the date format when a screen to set it is shown after setting the display language the first time the
power is turned on after purchase or after the H5studio has been reset to factory defaults.
The date written to recorded files will use the date format selected here.
1. Use the (selection) dial to select the date format and press the (ENTER) button.
A specific example of the set date format will be shown at the bottom of the screen using the current
date setting.
Setting value Explanation
YYMMDD The date is shown in year, month, day order.
MMDDYY The date is shown in month, day, year order.
DDMMYY The date is shown in day, month, year order.
After the date format setting is confirmed, set the date and time when a screen to set them opens.
(→Setting the date and time (first time starting up))
HINT
• The date format setting can also be changed later on the System Settings Screen. (→Setting the date
format)
• Use the (selection) dial to select and press the (ENTER) button to return to the
previous setting screen.
43
To Next Page
Loading...
