Repeating playback of a set interval (A-B repeat)
Playback can be repeated between two set points.
1. On the Playback Screen, use the (selection) dial to select (AB REPEAT) and press the
(ENTER) button.
2. Use the (selection) dial to select (SET A) and press the (ENTER) button.
3. Use the (selection) dial to set the A point (playback starting point) and press the
(ENTER) button.
Pressing the (ENTER) button confirms the A point and makes the A marker become blue.
4. Use the (selection) dial to select (SET B) and press the (ENTER) button.
5. Use the (selection) dial to set the B point (playback ending point) and press the
(ENTER) button.
• To change these settings, repeat steps 2 – 4.
• Use the (selection) dial to select (CLEAR) and press the (ENTER) button to clear
the set points.
6. When done making settings, use the (selection) dial to select (BACK) and press the
(ENTER) button.
93
To Next Page
Loading...
