Operating the H5studio from a smartphone
or tablet
The H5studio can be operated wirelessly from a smartphone or tablet by connecting a BTA-1 or another
dedicated wireless adapter and using the ZOOM Handy Control & Sync app designed to control it.
NOTE
• The ZOOM Handy Control & Sync app must be installed on the smartphone or tablet beforehand. The
ZOOM Handy Control & Sync app can be downloaded from the App Store. Refer to the manual for the
ZOOM Handy Control & Sync app for details about app settings and operation procedures.
• The H5studio cannot be controlled wirelessly from a smartphone or tablet during audio interface
operation (→Using as an audio interface).
• An H5studio cannot have both ZOOM Handy Control & Sync and an UltraSync BLUE connected at the
same time.
1. With the H5studio power off, remove the REMOTE connector cover on the right side. Then, connect
the BTA-1 or another dedicated wireless adapter.
2. Slide the (POWER/HOLD) switch toward (in the direction of the INPUT 1 and 2 jacks) to
turn on the power.
148
To Next Page
Loading...
