4. Use the (selection) dial to select the setting item and press the (ENTER) button.
Setting value Explanation
Voice
＋
Beep Setting items will be read aloud in the installed language. A beeping
sound will be used to notify the occurrence of error messages,
recording starting/stopping and volume adjustment, for example.
English is installed at the time of purchase, but other languages
can be installed and used for reading as desired. (→Installing guide
sounds)
Beep Only A beeping sound will be used to notify when error messages occur,
recording starts/stops and the volume changes, for example. Nothing
will be read aloud.
Off This turns off the guide sound.
NOTE
• The volume of the reading voice and beep sounds can also be adjusted. (→Setting the guide sound
volume)
• The language and version used for the guide sound can be checked on the Version Screen. (→Checking
guide sound information)
HINT
• The first time you turn the power on after purchase, this screen opens automatically.
• The guide sound can be turned on/off immediately by pressing and holding the (ENTER) button
when the Home Screen is open. (→Turning the guide sound on/off with a shortcut)
140
To Next Page
Loading...
