4. Use the (selection) dial to select the desired item to set and press the (ENTER) button.
Setting Explanation
Off Input signals will be handled as mono audio.
Stereo The two EXH-6e input signals will be handled as stereo audio.
INPUT A will become the L channel and INPUT B will become the R
channel.
MS The two EXH-6e input signals will be handled as stereo audio
captured in mid-side format.
Audio will be recorded using mid-side processing with INPUT A as the
mid and INPUT B as the side.
MS Raw The two EXH-6e input signals will be handled as stereo audio
captured in mid-side format.
Mid audio and side audio will be recorded separately as left and right
channels in a stereo file before mid-side processing.
This setting is useful for changing the side level during post-
production after recording.
HINT
Use the MIC GAIN knobs to adjust the mid-side balance.
Use the left MIC GAIN knob to adjust the mid (INPUT A) and the right MIC GAIN knob to adjust the side
(INPUT B).
Before doing this, set A&B Gain Knob Link to Off. (→Linking A and B gain for the EXH-6e)
163
To Next Page
Loading...
