Zoom H5studio - Page 38

Connecting mics and other devices to INPUT 1 and 2
In addition to input from the mic capsule, the H5studio also has INPUT 1 and 2. These can be used together
to input up to 4 channels.
Mics, mixers and other devices can be connected to INPUT 1 and 2.
■ Connecting mics
Connect dynamic and condenser mics with XLR plugs to INPUT 1 and 2.
• From the Menu, set the input level setting to “Mic”. (→Setting the input level (mic/line))
• Phantom power (+48V) can be supplied to condenser mics. (→Setting phantom power)
• When disconnecting a mic, pull the XLR plug while pushing the connector lock release button.
■ Connecting line level equipment
• From the Menu, set the input level to “Line”. (→Setting the input level (mic/line))
• Direct input of passive guitars and basses is not supported. Connect these instruments through a mixer
or effects device.
38