4. Use the (selection) dial to select the desired item to set and press the (ENTER) button.
Setting value Explanation
Off Input signals will be handled as mono audio.
Stereo The input signals from INPUT 1 and 2 will be handled as a stereo
audio signal.
INPUT 1 will become the L channel and INPUT 2 will become the R
channel.
MS The input signals from inputs 1 and 2 will be handled as stereo audio
captured in mid-side format.
Audio will be recorded using mid-side processing with INPUT 1 as the
mid and INPUT 2 as the side.
MS Raw The input signals from inputs 1 and 2 will be handled as stereo audio
captured in mid-side format.
Mid audio and side audio will be recorded separately as left and right
channels in a stereo file before mid-side processing.
This setting is useful for changing the side level during post-
production after recording.
60
To Next Page
Loading...
