Mark positions are shown above the progress bar.
Slide
▼
to change the playback position.
❽
Remaining battery charge
This shows the remaining battery charge. When the remaining battery charge becomes low, replace the bat-
teries (
→
“Using batteries” on page 16) or connect an AC adapter (
→
“Using an AC adapter” on page 16).
❾
Headphone/speaker volume button
Touch this to show the headphone/speaker volume slider. (
→
page 40)
❿
Clipping indicators
If a clipping indicator lights, adjust the input level (
→
“Setting recording (input) levels” on page 26) or set
the limiter (
→
“Comp/Limiter/Gate” on page 32).
⓫
Settings button
Press to access a list of projects on the SD card (
→
page 99) and to make automatic recording settings
(
→
page 48).
⓬
Track settings button
Press to make track settings, including Lo Cut and Phantom functions. (
→
page 26)
⓭
Recording format button
Use to set the recording format. (
→
page 45)
44