❼
Time display
Current elapsed recording/playback time
❽
Progress bar
This shows the current playback location.
Slide
▼
to change the playback position.
❾
Remaining battery charge
This shows the remaining battery charge. When the remaining battery charge becomes low, replace the bat-
teries (
→
“Using batteries” on page 16) or connect an AC adapter (
→
“Using an AC adapter” on page 16).
❿
Headphone/speaker volume button
Touch this to show the headphone/speaker volume slider. (
→
page 40)
⓫
Track display switching button
This changes the tracks shown
⓬
Settings button
Press to access a list of projects on the SD card (
→
page 99) and to create new projects (
→
page 58).
⓭
Low/Mid/High equalization
These can be used to boost and cut the equalization of low, mid and high frequencies.
⓮
Track Setting button
Press to make track settings, including Lo Cut and Phantom functions. (
→
page 27)
⓯
EFFECT settings button
Insert effects can be used. (
→
“Using effects” on page 64)
⓰
Effect Send
Use this to adjust the level sent to the send effect.
⓱
Pan
Use this to adjust the left-right balance.
57
To Next Page
Loading...
