Zoom PodTrak P4 - Initial Setup Procedures; Setting Date and Time

Setting the date and time (rst time starting up)
The rst time the power is turned on after purchase, set the date and time when the Set Date/Time setting
screen opens.
The date and time are stored in recorded les, and the recording start date/time is used in the le name.
Having the correct date and time set is helpful when looking for les, for example, by allowing contents to
be determined by names.
Year Month Day
Hour Minute OK
Cursor
1.
Press / to move the cursor to the item you want to set, and press .
2.
Use / to change the value, and press to conrm.
3.
Repeat steps 1 and 2 to set the date and time.
4.
After setting the date and time, use / to select OK, and press .
This conrms the set date and time and reopens the Home Screen.
HINT
The date and time setting can also be changed later from the Menu Screen. ( “Modifying the date and
time” on page 41)
17