Zoom PodTrak P4 User Manual

5.
Use / to select Full Test, and press .
The amount of time required will be shown.
6.
Use / to select Execute, and press .
The card performance test will start.
The result of the test will be shown when it completes.
If the access rate MAX reaches 100%, the card will fail (NG).
NOTE
Even if a performance test result is “Pass”, there is no guarantee that writing errors will not occur. This
information is just to provide guidance.
HINT
Press to cancel a test while it is being executed.
48

Zoom PodTrak P4 Specifications

Audio Specifications

number of input channels	4 (mono/stereo)
number of output channels	1 (headphone × 4)
phantom power	+48 V

Ports & Interfaces

connectors	MIC XLR jacks (2: HOT)
smartphone connection jack	TRRS mini jack (4 contacts, TIP: L, RING1: R, RING2: GND, SLEEVE: MIC)
USB	USB Type-C

Power

dc power supply	5 V USB Type-C
battery type	2 AA batteries (alkaline, NiMH or lithium)
ac adapter	DC 5 V/1 A

Battery Life

alkaline batteries operation time	about 4 hours
nimh batteries operation time	about 4.5 hours
lithium batteries operation time	about 9 hours

Weight and Dimensions

external dimensions	112 mm (W) × 155 mm (D) × 47 mm (H)
weight	290 g