Zoom PodTrak P4 - Additional Error Scenarios; Error Messages for Recording and Files

Pop-up message Explanation
No Last Recorded File!
The latest recording le is not available.
This appears if the most recently recorded le does not exist when is
pressed on the Home Screen.
File Full!
The maximum number of les on an SD card has been reached.
Delete unnecessary les ( “Deleting les” on page 30), or use a different
SD card.
Now Recording!
This operation is disabled during recording.
During recording, the power cannot be turned off and the Menu Screen cannot
be opened.
Write Error!
An error writing to the SD card.
See “Troubleshooting” on page 54.
No File!
No le is available.
This appears when Files is selected on the Menu Screen if the SD card has no
les.
File Assigned To Sound Pad
Missing!
A le assigned to a SOUND PAD cannot be found.
Assign a le to the SOUND PAD. ( “Assigning audio les to SOUND PAD
buttons” on page 33)
Sound Pad Files Will Be Erased!
Formatting will erase les assigned to SOUND PAD.
This appears when starting to format an SD card if it contains les assigned to
SOUND PAD buttons.
Setting Changes After
Recording!
Phantom power setting changes will be applied after recording completes.
This appears when the INPUT SELECT switch is changed during recording.
Low Power! Please Power Off.
The remaining battery charge is insufcient. Turn the power off.
Turn the power off and install new batteries or supply power by connecting an
AC adapter, mobile battery or computer, for example. ( “Providing power”
on page 15)
53