Turning the power on
1.
Conrm that the output devices connected to the
P8
are turned off.
2.
Set all and faders to their minimum values.
3.
Set to ON.
This turns the power on and opens the Home Screen on the touchscreen.
The rst time the power is turned on after purchase and after the
P8
has been restored to its factory
default state, make initial settings. (
“Making initial settings” on page 22)
4.
Turn on the output devices connected to the
P8
.
NOTE
When running on power from the AC adapter, the
P8
will automatically turn off if it is unused for 10
hours. To keep the power on at all times, disable the automatic power saving function. (
“Setting the
automatic power off function” on page 87)
20
To Next Page
Loading...
