Zoom PodTrak P8 - Selecting and Playing Files; File format overview for editing

Selecting les and playing them
Files that have been recorded by the
P8
or that are saved on the SD card can be selected and played.
■
File format overview
Select audio les with the following formats.
•Format: WAV
•Sample rate: 44.1 kHz
•Bit rate: 16/24-bit
•Mono/stereo
NOTE
•
If a le is not compatible with the
P8
, its name will be gray and it will not be selectable or an error pop-
up message will appear when it is selected.
•
Files that are not compatible with the
P8
but can be converted will appear on the File List Screen. When
they are selected, they can be converted to a compatible le format. Select the le after conversion.
•After the sample rate of a le has been converted to 44.1 kHz, “_441” will be added to the end of the le
name.
•After a le has been converted from MP3 to WAV, it will have the same name.
•A new le will be created during conversion, so the original le will remain.
1.
Tap on the Home Screen.
This opens the File List Screen.
2.
Tap the audio le you want to play.
Play button
Tap to start and stop
playback.
The editing screen for the selected audio le will be shown.
NOTE
•When using play buttons on the File List Screen to play les, 48kHz, 88.2kHz and 96kHz WAV les can
be played, but they will not be played with the correct pitch or speed.
•Play buttons only appear for WAV les.
38