Editing les
The
P8
can be used to edit the podcast stereo le that is a mix of all channels.
■
File format overview
Files with the following formats can be edited.
•Format: WAV
•Sample rate: 44.1 kHz
•Bit rate: 16/24-bit
•Mono/stereo
NOTE
•Individual channel les cannot be edited.
•
If a le is not compatible with the
P8
, its name will be gray on the File List Screen and it will not be
selectable or an error pop-up message will appear when it is selected.
•
Files that are not compatible with the
P8
but can be converted will appear on the File List Screen. When
they are selected, they can be converted to a compatible le format. Select the le after conversion.
•After the sample rate of a le has been converted to 44.1 kHz, “_441” will be added to the end of the le
name.
•After a le has been converted from MP3 to WAV, it will have the same name.
•A new le will be created during conversion, so the original le will remain.
On the File Editing Screen, the waveform of the audio le is shown and the following operations are
possible.
•Change icon ( “Changing icons” on page 58)
•Cut unnecessary parts ( “Cutting unnecessary parts (trimming)” on page 59)
•Divide le ( “Dividing les” on page 61)
•Add fade-in/out ( “Adding fade-ins and outs” on page 63)
•Add background music ( “Adding music and other background sound” on page 66)
•Apply loudness normalization ( “Optimizing podcast volume (loudness normalization)” on page 69)
•Convert to MP3 ( “Converting les to MP3 format” on page 71)
•Change le name ( “Changing le names” on page 57)
•Add to favorites ( “Opening the File Editing Screen” on page 56)
•Delete le ( “Opening the File Editing Screen” on page 56)
•Assign to SOUND PAD button ( “Assigning audio les from the File Editing Screen” on page 45)
55
To Next Page
Loading...
Need help?
Power
Ports & Interfaces
Recording
Display
Weight and Dimensions
