Zoom PodTrak P8 User Manual

Making initial settings
Setting the date/time and language (rst time starting up)
The rst time the power is turned on after purchase, a screen where the date/time and language can be
set opens on the touchscreen.
The date and time are stored in recorded les, and the date and time recording started are used in the
le name. Having the correct date and time set is helpful when looking for les, for example, by allowing
content to be identied by names.
The language shown on the touchscreen can also be selected.
1.
Tap the language to be shown on the touchscreen.
The touchscreen display will change to the selected language.
2.
Tap and to set the Year, Month, Day, Hour, and Minute.
3.
After setting the date and time, tap .
This conrms the set date and time and opens the ON AIR settings screen.
HINT
The date/time and language settings can be changed later by tapping the Date and Time display on the
Home Screen. ( “Modifying the date and time” on page 74)
22

Zoom PodTrak P8 Specifications

Power

phantom power	+48 V
battery type	4 AA batteries
ac adapter	DC 5 V/1 A

Ports & Interfaces

usb type	USB Type-C
headphones output	3.5mm stereo mini
speaker output	TRS jacks

Recording

recorder format	WAV 44.1kHz, 16-bit, mono/stereo
audio interface	44.1kHz, 16-bit, 2-in/2-out
supported media	4–32 GB cards (SDHC), 64–512 GB cards (SDXC)

Display

display type	full-color touchscreen LCD
display size	4.3 inches
display resolution	480×272

Weight and Dimensions

weight	1.43 kg
width	295 mm
depth	248 mm
height	61 mm