Zoom PodTrak P8 User Manual

Transferring les to a computer, smartphone or
tablet
The input signals of each channel and the sounds played by pressing the SOUND PAD buttons are
recorded as separate les. Various editing functions can be used on them after recording by transferring
them to a computer or other device. For example, their mix balance can be adjusted, effects can be added,
and lengths can be changed. After editing them, upload them to the podcasting service or server you are
using.
Transferring les to a computer, smartphone or tablet
Recorded les can be transferred to computers, smartphones and tablets.
1.
Tap on the Home Screen.
2.
Tap .
This opens the USB FILE TRANSFER screen.
3.
Use a USB cable to connect the
P8
with a computer, smartphone or tablet ( “Connecting a
computer, smartphone or tablet by USB” on page 28).
When connecting a smartphone or tablet, turn Tablet Mode on. (
“Preparing to connect a
smartphone or tablet” on page 29)
4.
Use the computer or other device to transfer the necessary les.
NOTE
•When the USB FILE TRANSFER screen is open, other functions and buttons cannot be used. Moreover,
the channel input signals and sounds played when SOUND PAD buttons are pressed will stop being
output from the
P8
.
•The USB FILE TRANSFER screen can also be opened from the Home Screen by tapping
to open
the SD CARD screen, and tapping .
72

Zoom PodTrak P8 Specifications

Power

phantom power	+48 V
battery type	4 AA batteries
ac adapter	DC 5 V/1 A

Ports & Interfaces

usb type	USB Type-C
headphones output	3.5mm stereo mini
speaker output	TRS jacks

Recording

recorder format	WAV 44.1kHz, 16-bit, mono/stereo
audio interface	44.1kHz, 16-bit, 2-in/2-out
supported media	4–32 GB cards (SDHC), 64–512 GB cards (SDXC)

Display

display type	full-color touchscreen LCD
display size	4.3 inches
display resolution	480×272

Weight and Dimensions

weight	1.43 kg
width	295 mm
depth	248 mm
height	61 mm