Assigning audio les to SOUND PAD buttons
Built-in sounds and audio les saved on an SD card can be assigned to SOUND PAD buttons.
Use a computer beforehand to store the audio le on the SD card in any directory other than the P8_
Multitrack and P8_Settings folders. ( “Transferring les to a computer, smartphone or tablet” on page
72)
■
File format overview
Assign audio les with the following formats.
•Format: WAV
•Sample rate: 44.1 kHz
•Bit rate: 16/24-bit
•Mono/stereo
NOTE
•If a le is not compatible with SOUND PAD assignment, its name will be gray and it will not be
selectable or an error pop-up message will appear when it is selected.
•Files that are not compatible with SOUND PAD assignment but can be converted will appear on the File
List Screen. When they are selected, they can be converted to a compatible le format. The new le will
be automatically assigned after conversion.
•After the sample rate of a le has been converted to 44.1 kHz, “_441” will be added to the end of the le
name.
•After a le has been converted from MP3 to WAV, it will have the same name.
•A new le will be created during conversion, so the original le will remain.
•88.2kHz and 96kHz WAV les can be assigned to SOUND PAD buttons, but they will not be played with
thecorrect pitch or speed.
•Whether or not 48kHz WAV les are converted to 44.1kHz can be selected. If they are not converted,
they can be assigned to SOUND PAD buttons, but they will not be played with the correct pitch or
speed.
Assigning audio les on the SOUND PAD settings screen
1.
Tap on the Home Screen.
2.
Tap the SOUND PAD button (A–I) to which you want to assign an audio le.
Change the bank as necessary (
page 42).
The selected SOUND PAD will light.
43
To Next Page
Loading...
