Zoom PodTrak P8 - P8 Folder and File Structure

P8
folder and le structure
When recording with the
P8
, folders and les are created on SD cards in the following manner.
Root
2020_0101_0000.WAV
2020_0101_0010.WAV
MIC1.WAV
2020_0101_0000.ZWV
MIC2.WAV
MIC3.WAV
MIC4.WAV
MIC5.WAV
PHONE.WAV
SOUND_PAD.WAV
2020_0101_0024.WAV
P8_Multitrack 2020_0101_0000
2020_0101_0010
2020_0101_0024
P8_Settings
MIC6.WAV
or
USB.WAV
2020_0101_0010.ZWV
2020_0101_0024.ZWV
P8SETTING.ZSF
(Stereo le for podcasting)
(Mono le recording of signals from INPUT 1)
A folder with the same name as the stereo le for podcasting will be created,
and recording les for each track will be saved in it. (This happens only if
Keep Track Files is set to Original Data or With Tone & Comp (
page 79).)
(Mono le recording of signals from INPUT 2)
(Mono le recording of signals from INPUT 3)
(Stereo le recording of signals from smartphone connection jack)
(Mono le recording of signal from INPUT 6)
(Stereo le recording of signals from USB)
(Stereo le recording of SOUND PAD signals)
(
P8
settings backup le)
These les can be used for podcasting.
These are separate les for each channel and the
SOUND PAD sounds. These can be edited on a
computer or other device.
(Mono le recording of signals from INPUT 4)
(Mono le recording of signal from INPUT 5)
(
Waveform display data of stereo les for podcasting )
This data is for showing the waveforms used
during editing.
73