Zoom PodTrak P8 - Inputting USB Audio Return on Channel 6; Setting USB Mix Minus

Inputting USB audio return on channel 6
INPUT SELECT
switch 6
Set to
.
MUTE button 6
Conrm that this is
not lit.
ON AIR button 6
Conrm that this is
lit.
Track button 6
Tap to adjust the audio
quality (
page 34).
Select the
P8
as the input and output device on the connected computer or other device.
NOTE
“ZOOM P8 Audio” will appear on the computer.
Setting USB Mix Minus
When using the
P8
as an audio interface, this can prevent feedback to a person participating in a call
through the connected device.
1.
Tap on the Home Screen.
2.
Tap the ON/OFF button to change the USB Mix Minus setting.
Setting Explanation
OFF
Sound from USB input is also output by USB.
ON Sound from USB input is not output by USB.
30