ZyXEL Communications EMG3425-Q10A - Page 156

Chapter 21 Remote Management
EMG3425-Q10A User’s Guide
156
Figure 88 Configuration > Management > Remote MGMT > TR069
The following table describes the labels in this screen.
Table 67 Configuration > Management > Remote MGMT > TR069
LABEL DESCRIPTION
Inform Select Enable for the EMG3425-Q10A to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the EMG3425-Q10A sends information to
the auto-configuration server.
Inform Source Select SN or MAC for the EMG3425-Q10A to be the source of information via TR-069
on the WAN.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS Username Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
Connection Request
Port
Enter the connection request port number.
When the ACS makes a connection request to the EMG3425-Q10A, this port number is
used to authenticate the ACS.
Connection Request
Username
Enter the connection request user name.
When the ACS makes a connection request to the EMG3425-Q10A, this user name is
used to authenticate the ACS.
Connection Request
Password
Enter the connection request password.
When the ACS makes a connection request to the EMG3425-Q10A, this password is
used to authenticate the ACS.
Interface This is the interface of the connection.
Upload Certificate The EMG3425-Q10A can use certificates (also called digital IDs) to authenticate users.
Certificates are based on public-private key pairs. A certificate contains the certificate
owner’s identity and public key.