ZyXEL Communications EMG3425-Q10A - Page 179

Chapter 25 Maintenance
EMG3425-Q10A User’s Guide
179
Figure 108 Maintenance > Time
The following table describes the labels in this screen.
Table 76 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your EMG3425-Q10A.
Each time you reload this page, the EMG3425-Q10A synchronizes the time with the time
server.
Current Date This field displays the date of your EMG3425-Q10A.
Each time you reload this page, the EMG3425-Q10A synchronizes the date with the time
server.
Current Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time
Server
Select this radio button to have the EMG3425-Q10A get the time and date from the time
server you specified below.
User Defined
Time Server
Address
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your time
server. Check with your ISP/network administrator if you are unsure of this information.