Chapter 5 Access Point Mode
EMG3425-Q10A User’s Guide
34
The following table describes the labels shown in the Status screen.
Table 9 Status Screen: Access Point Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 3.1.1 on page 23) to which the EMG3425-Q10A is set - AP
Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
IPv6 Address This shows the IPv6 address of the EMG3425-Q10A on the LAN.
WLAN 2.4G Information
WLAN OP Mode This is the device mode (Section 3.1.1 on page 23) to which the EMG3425-Q10A’s wireless
LAN is set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG3425-Q10A in the 2.4GHz wireless
LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG3425-Q10A is using.
WLAN 5G Information
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG3425-Q10A in the 5GHz wireless
LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG3425-Q10A is using.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 7.5 on page 53).
Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen (Section 7.6 on
page 54). Use this screen to view the wireless stations that are currently associated to the
EMG3425-Q10A’s 2.4GHz wireless LAN.
WLAN 5G Station Status Click Details... to go to the Monitor > WLAN 5G Station Status screen (Section 7.6 on
page 54). Use this screen to view the wireless stations that are currently associated to the
EMG3425-Q10A’s 5GHz wireless LAN.
System Status
Item This column shows the type of data the EMG3425-Q10A is recording.
Data This column shows the actual data recorded by the EMG3425-Q10A.
System Up Time This is the total time the EMG3425-Q10A has been on.
Current Date/Time This field displays your EMG3425-Q10A’s present date and time.
System Resource
To Next Page
Loading...
