Chapter 6 Tutorials
EMG3425-Q10A User’s Guide
46
6 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
7 The Easy Mode appears. Click Expert Mode in the navigation panel.
8 Go to Configuration > Network > Wireless LAN 2.4G > More AP. Click the Edit icon of the first
entry to configure wireless and security settings for SSID_Worker.
9 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Worker
to allow wireless clients in the same wireless network to communicate with each other. Click Apply.
10 Click the Edit icon of the second entry to configure wireless and security settings for SSID_VoIP.
To Next Page
Loading...
