ZyXEL Communications EMG3425-Q10A - Page 82

Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
82
Figure 40 Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels in this menu.
Table 25 Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL DESCRIPTION
SSID Select Select the SSID for which you want to configure MAC filtering.
MAC Address
Filter
Select to turn on (Enable) or off (Disable) MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the EMG3425-Q10A, MAC addresses not listed will be
denied access to the EMG3425-Q10A.
Select Deny to block access to the EMG3425-Q10A, MAC addresses not listed will be allowed
to access the EMG3425-Q10A.
MAC Filter Summary
Set This is the index number of the MAC address.
MAC Address Enter the MAC address of the wireless station that are allowed or denied access to the
EMG3425-Q10A.
Apply Click Apply to save your changes back to the EMG3425-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.