GS-4012F User’s Guide
Chapter 39 Introducing the Commands 229
vrrp
Displays VRRP settings.
running-config
Displays current operating configuration.
service-control
Displays service control settings.
snmp-server
Displays SNMP settings.
spanning-tree config
Displays Spanning Tree Protocol (STP)
settings.
s s h
Displays general SSH settings.
known-hosts
Displays known SSH hosts information.
key
<rsa1|rsa|dsa>
Displays internal SSH public and private
key information.
session
Displays current SSH session(s).
system-information
Displays general system information.
t i m e
Displays current system time and date.
timesync
Displays time server information.
trunk
Displays link aggregation information.
v l a n
Displays the status of all VLANs.
<vlan-id>
Displays the status of the specified VLAN.
vlan-stacking
Displays VLAN stacking settings.
vlan1q gvrp
Displays GVRP settings.
port-isolation
Displays port isolation settings.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute <ip|host-name> [in-
band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
<index>
Saves current configuration to the
specified configuration file on the switch.
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
