ZyXEL Communications GS-4012F - No Command Examples; No Mirror-Port; No Https Timeout; Figure 158 CLI: Reset to the Factory Default Example

GS-4012F User’s Guide
Chapter 40 Command Examples 255
The following example resets both configuration files to the factory default settings.
Figure 158 CLI: Reset to the Factory Default Example
40.7 no Command Examples
These are the commonly used command examples that belong to the no group of commands.
40.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
Figure 159 no mirror-port Command Example
40.7.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
Figure 160 no https timeout Command Example
ras# erase running-config
ras# write memory
ras# write memory 2
ras(config)# no mirror-port
ras(config)# no https timeout
Cache timeout 300