GS-4012F User’s Guide
54 Chapter 4 The Web Configurator
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management, Access Control and then Logins to display the next screen.
Figure 17 Change Administrator Login Password
4.4 Switch Lockout
Note: You cannot log into the switch using the same administrator account
concurrently on different IP routing domains.
You could lock yourself (and all others) out from the switch by:
1 Deleting the management VLAN (default is VLAN 1).
2 Deleting all IP routing domains.
3 Deleting all port-based VLANs with the CPU port as a member. The “CPU port” is the
management port of the switch.
4 Filtering all traffic to the CPU port.
5 Disabling all ports.
IP Table This link takes you to a screen where you can view the IP addresses (and types) of
devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Routing Table This link takes you to a screen where you can view the routing table.
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION
To Next Page
Loading...
