GS-4012F User’s Guide
246 Chapter 39 Introducing the Commands
fixed <port-list>
Specifies the port(s) to be a permanent
member of this VLAN group.
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN group.
help
Displays a list of available VLAN
commands.
inactive
Disables the specified VLAN.
name <name-str>
Specifies a name for identification
purposes.
Sets fixed port(s) to normal port(s).
forbidden <port-
list>
Sets forbidden port(s) to normal
port(s).
untagged <port-
list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
inactive
Enables the specified VLAN.
ip address inband-
default dhcp-bootp
Sets the default in-band interface to
use a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
ip address <ip-
address> <mask>
Deletes the IP address and subnet
mask from this VLAN.
normal <port-
list>
Specifies the port(s) to dynamically
join this VLAN group using GVRP
ip address inband-default
dhcp-bootp release
Releases the dynamic in-band IP
address.
inband-default
dhcp-bootp renew
Updates the dynamic in-band IP
address.
inband-default
dhcp-bootp
Sets the dynamic in-band IP address
inband-default
<ip-address>
<mask>
Sets a static in-band IP address and
subnet mask.
default-gateway
<ip-address>
Sets a default gateway IP address for
this VLAN.
<ip-address>
<mask>
Sets the management IP address and
subnet mask of the switch in the
specified VLAN.
untagged <port-
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted
with this VLAN Group ID.
Table 93 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
