IES-1000 User’s Guide
IP Commands 33-5
Syntax:
192.168.
1.1 ip> enable [<if> [mtu <size> [<ip> [<ipmask>]]]
where
<i/f> =
The name of an interface (“ether” for this device).
[mtu <size>] =
Maximum Transmit Unit. The maximum packet size that this interface is to
send.
<ip> =
The IP address of the device’s interface.
<ipmask> =
The subnet mask of the device’s IP address.
This command sets the Ethernet port’s IP address, subnet mask and the largest packet size that this interface
sends.
To Next Page
Loading...
