Appendix A Log Descriptions
NXC Series User’s Guide
452
Register FTP ALG extra
port=%d failed.
FTP ALG apply additional signal port failed.
%d: Port number
Register FTP ALG
signal port=%d failed.
FTP ALG apply signal port failed.
%d: Port number
Table 217 Certificate Path Verification Failure Reason Codes
CODE DESCRIPTION
1 Algorithm mismatch between the certificate and the search constraints.
2 Key usage mismatch between the certificate and the search constraints.
3 Certificate was not valid in the time interval.
4 (Not used)
5 Certificate is not valid.
6 Certificate signature was not verified correctly.
7 Certificate was revoked by a CRL.
8 Certificate was not added to the cache.
9 Certificate decoding failed.
10 Certificate was not found (anywhere).
11 Certificate chain looped (did not find trusted root).
12 Certificate contains critical extension that was not handled.
13 Certificate issuer was not valid (CA specific information missing).
14 (Not used)
15 CRL is too old.
16 CRL is not valid.
17 CRL signature was not verified correctly.
18 CRL was not found (anywhere).
19 CRL was not added to the cache.
20 CRL decoding failed.
21 CRL is not currently valid, but in the future.
22 CRL contains duplicate serial numbers.
23 Time interval is not continuous.
24 Time information not available.
25 Database method failed due to timeout.
26 Database method failed.
27 Path was not verified.
28 Maximum path length reached.
Table 216 NAT Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
