Appendix A Log Descriptions
NXC Series User’s Guide
455
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
A wireless client used an incorrect WPA or WPA2 user name or user password and
failed authentication by the NXC’s local user database while trying to connect to
the specified WLAN interface (first %s). The MAC address of the wireless client is
listed (second %s).
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message
There was an error when attempting to extract the EAP-Message from a RADIUS
message. The first %s is the WLAN interface. The second %s is the MAC address of
the wireless client.
Table 220 Account Logs
LOG MESSAGE DESCRIPTION
Account %s %s has been
deleted.
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
Account %s %s has been
changed.
A user changed an ISP account profile’s options.
1st %s: profile type, 2nd %s: profile name.
Account %s %s has been
added.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
Table 221 Force Authentication Logs
LOG MESSAGE DESCRIPTION
Force User
Authentication will be
enabled due to http
server is enabled.
Force user authentication will be turned on because HTTP server was turned on.
Force User
Authentication will be
disabled due to http
server is disabled.
Force user authentication will be turned off because HTTP server was turned off.
Force User
Authentication may not
work properly!
Table 219 WLAN Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
