ZyXEL Communications NXC Series - Page 456

Appendix A Log Descriptions
NXC Series User’s Guide
456
Table 222 File Manager Logs
LOG MESSAGE DESCRIPTION
ERROR:#%s, %s
Apply configuration failed, this log will be what CLI command is and what error
message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Apply configuration failed, this log will be what CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ERROR:#%s, %s
Run script failed, this log will be what wrong CLI command is and what error
message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Run script failed, this log will be what wrong CLI command is and what warning
message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system...
Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration file.
%s is configuration file name.
Running %s...
An administrator ran the listed shell script.
%s is script file name.
Table 223 DHCP Logs
LOG MESSAGE DESCRIPTION
Can't find any lease
for this client - %s,
DHCP pool full!
All of the IP addresses in the DHCP pool are already assigned to DHCP clients, so
there is no IP address to give to the listed DHCP client.
DHCP server offered %s
to %s(%s)
The DHCP server feature gave the listed IP address to the computer with the listed
hostname and MAC address.
Requested %s from
%s(%s)
The NXC received a DHCP request for the specified IP address from the computer
with the listed hostname and MAC address.
No applicable lease
found for DHCP request
- %s !
There is no matching DHCP lease for a DHCP client’s request for the specified IP
address.
DHCP released %s with
%s(%s)
A DHCP client released the specified IP address. The DHCP client’s hostname and
MAC address are listed.
Sending ACK to %s
The DHCP server feature received a DHCP client’s inform packet and is sending
an ACK to the client.
DHCP server assigned
%s to %s(%s)
The DHCP server feature assigned a client the IP address that it requested. The
DHCP client’s hostname and MAC address are listed.