Chapter 11 USB Services
PMG5318-B20A User’s Guide
100
Each field is described in the following table.
11.3.1 Add New File Sharing User
In the Account Management screen, click the Add button or an Edit icon next to a user account
to create a new user or configure the existing user on the GPON Device.
Figure 52 Account Management: Add
Figure 53 Account Management: Edit
Each field is described in the following table.
Table 36 Usb Services > File Sharing > Account Management
LABEL DESCRIPTION
Add Click this to set up a file-sharing account. Before you can share files you need a user account.
Active This field displays whether a user account is activated or not. Select the check box to enable the
account. Clear the check box to disable the account.
Status
This field displays the status of the user account.
User Name This field displays the name of the user account.
Modify Click the Edit icon to modify the user account.
Click the Remove icon to remove the user account from the list. Note that you cannot remove
the default superuser account.
Apply
Click this to save your changes to the GPON Device.
Cancel Click this to set every field in this screen to its last-saved value.
Table 37 Account Management: Add/Edit
LABEL DESCRIPTION
User Name Enter a user name that will be allowed to access shares. You can enter up to 16
characters. Only letters and numbers allowed.
This field is greyed-out when you are editing a user account.
New Password
Enter the password used to access the share. You must enter 5 to 15 characters. Only
letters and numbers are allowed. The password is case sensitive.
Retype New
Password
Retype the password that you entered above.
To Next Page
Loading...
