EasyManua.ls Logo

ZyXEL Communications PMG5318-B20A - Before You Start; The General Screen

ZyXEL Communications PMG5318-B20A
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Wireless LAN
PMG5318-B20A User’s Guide
46
Finding Out More
See Section 6.9 on page 57 for advanced technical information on wireless networks.
6.1.2 Before You Start
Before you start using these screens, ask yourself the following questions. See Section 6.1.1 on
page 45 if some of the terms used here are not familiar to you.
What wireless standards do the other wireless devices in your network support (IEEE 802.11g,
for example)? What is the most appropriate standard to use?
What security options do the other wireless devices in your network support (WPA-PSK, for
example)? What is the strongest security option supported by all the devices in your network?
Do the other wireless devices in your network support WPS (Wi-Fi Protected Setup)? If so, you
can set up a well-secured network very easily.
Even if some of your devices support WPS and some do not, you can use WPS to set up your
network and then add the non-WPS devices manually, although this is somewhat more
complicated to do.
What advanced options do you want to configure, if any? If you want to configure advanced
options such as Quality of Service, ensure that you know precisely what you want to do. If you do
not want to configure advanced options, leave them as they are.
6.2 The General Screen
Use this screen to configure the wireless settings of your GPON Device. Click Network > Wireless
LAN to open the General screen.
Figure 19 Network > Wireless LAN > General

Table of Contents

Related product manuals