Chapter 12 Remote Management
PMG5318-B20A User’s Guide
110
Click Advanced > Remote MGMT > UPNP to display this screen.
Figure 60 Remote Management: UPNP
The following table describes the labels in this screen.
12.7.2 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows XP.
Installing UPnP in Windows XP
Follow the steps below to install the UPnP in Windows XP.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
Table 43 Remote Management: UPNP
LABEL DESCRIPTION
Access Status Select the interface(s) through which a computer may access the GPON Device using UPnP.
Be aware that anyone could use a UPnP application to open the web configurator's login
screen without entering the GPON Device's IP address (although you must still enter the
password to access the web configurator).
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
