Chapter 6 Wireless LAN
PMG5318-B20A User’s Guide
56
Click Network > Wireless LAN > Status. The following screen displays.
Figure 28 Network > Wireless LAN > Status
The following table describes the labels in this screen.
6.8 The Isolation Screen
Use this screen to enable/disable SSID isolation.
Click Network > Wireless LAN > Isolation. The following screen displays.
Figure 29 Network > Wireless LAN > Isolation
The following table describes the labels in this screen.
Table 22 Network > Wireless LAN > Status
LABEL DESCRIPTION
# This field displays the index number of the wireless client.
MAC Address This field displays the MAC address for the wireless adapter of the wireless client.
RSSI0-1 This field displays the Received Signal Strength Indication (RSSI), which is an overall
measurement of radio signal strength. A higher RSSI level indicates a stronger signal. An
RSSI displays for each of the GPON Device’s antennae.
Association Time This field displays the length of time the wireless client has been connected.
Refresh Click this to update the information in the table.
Table 23 Network > Wireless LAN > Isolation
LABEL DESCRIPTION
Enable SSID
Isolation
Select this to keep the wireless clients in an SSID from directly communicating with
wireless clients in other SSIDs through the GPON Device.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
