Chapter 6 Wireless LAN
PMG5318-B20A User’s Guide
55
6.6 The WMM Screen
Use this screen to enable or disable Wi-Fi MultiMedia (WMM) wireless networks for multimedia
applications.
Click Network > Wireless LAN > WMM. The following screen displays.
Figure 27 Network > Wireless LAN > WMM
The following table describes the labels in this screen.
6.7 The Status Screen
Use this screen to view the status of wireless connections to the GPON Device.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 20 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
Table 21 Network > Wireless LAN > WMM
LABEL DESCRIPTION
Enable WMM
SSID1-4
This enables the Device to automatically give a service a priority level according to the
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
