ZyXEL Communications PMG5318-B20A - Main Window

Chapter 2 The Web Configurator
PMG5318-B20A User’s Guide
18
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
Right after you log in, the Status screen is displayed. See Chapter 3 on page 21 for more
information about the Status screen.
Advanced
Remote MGMT WWW Use this screen to configure through which interface(s) and from which
IP address(es) users can use HTTP to manage the GPON Device.
Telnet Use this screen to configure through which interface(s) and from which
IP address(es) users can use Telnet to manage the GPON Device.
FTP Use this screen to configure through which interface(s) and from which
IP address(es) users can use FTP to access the GPON Device.
SSH Use this screen to configure Secure SHell (SSH) connections to the
GPON Device.
ICMP Use this screen to set which interfaces respond to PING requests.
UPnP Use this screen to configure UPnP connections to the GPON Device.
TR-069 Use this screen to configure your ONT to be managed by an ACS.
Static Route Use this screen to configure the required information for a static route.
Dynamic DNS Use this screen to enable DDNS and configure the DDNS settings on
the ONT.
Security
Firewall General Use this screen to enable firewall and set the default action that the
firewall takes on packets depending on packet direction.
Rules Use this screen to view the configured firewall rules and add, edit or
remove a firewall rule.
Maintenance
System General Use this screen to configure your device’s name, management
inactivity timeout and password.
Time Setting Use this screen to change your GPON Device’s time and date.
SLID Use this screen change your ONT’s Subscriber Location ID (SLID)
setting.
Logs View Log Use this screen to display your device’s logs.
Log Settings Use this screen to select which logs and/or immediate alerts your
device is to record. You can also set it to e-mail the logs to you.
Tools Firmware Use this screen to upload firmware to your device.
Configuration Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Restart This screen allows you to reboot the GPON Device without turning the
power off.
Diagnostic General Use this screen to test the connections to other devices.
Table 2 Navigation Panel Summary
LINK TAB FUNCTION