Chapter 17 Logs
PMG5318-B20A User’s Guide
142
17.3 Log Settings
Use this screen to configure which logs to display on the View Logs screen (see Chapter 17 on
page 141). Click Maintenance > Logs > Log Settings.
Figure 76 Log Settings
Time This field displays the time the log was recorded.
Facility This indicates the type of connection to the GPON Device.
Facility types are as follows:
• tr069 - This indicates a log from an external auto-configuration server.
• ntpclient - This indicates a log from the ntpclient.
• login - This indicates a message from the Web Configurator login information.
• dhcp - This indicates a log message from the device’s DHCP server.
• dnsmasq - This indicates a log message from the device’s DNS forwarder.
• pppoe - This indicates a log message from the device’s Point-to-Point Protocol daemon.
• kernel - This indicates a log message related to the device’s Central Processing Unit (CPU),
memory, and I/O ports.
• OMCI - This indicates a log message about the GPON OMCI Protocol daemon.
• VoIP - This indicates a log a message from the SIP server.
Level This indicates the log severity.
Message This field states the reason for the log.
First Click this to cycle to the first page of logs.
Previous Click this to cycle to the previous page of logs.
Page This indicates which page you are on, out of how many. You can enter a page number here and
press [Enter] to jump directly to that page.
Next Click this to cycle to the next page of logs.
Last Click this to cycle to the last page of logs
Refresh Click this to refresh the logs screen.
Table 56 View Log
LABEL DESCRIPTION
To Next Page
Loading...
