ZyXEL Communications PMG5318-B20A - Using UPnP in Windows XP Example

Chapter 12 Remote Management
PMG5318-B20A User’s Guide
111
2 Click Add/Remove Windows Components. Scroll down the bar until you see Networking
Services. Select it and then click Details.
Add/Remove Programs: Windows Setup: Communication
3 In the Networking Services window, select the Internet Gateway Device Discovery and
Control Client and Universal Plug and Play check boxes.
Add/Remove Programs: Windows Setup: Communication: Components
4 Click OK to go back to the Windows Components Wizard window and click Next.
5 Click Finish.
12.7.3 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the GPON Device.