Chapter 6 Wireless LAN
PMG5318-B20A User’s Guide
54
Click Network > Wireless LAN > MAC Filter. The following screen displays.
Figure 26 Network > Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 20 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
Filter Action
Define the MAC filter action for all SSIDs’ MAC addresses listed in the MAC Address table
below.
Select Deny to block access to the GPON Device. MAC addresses not listed can access the
GPON Device.
Select Allow to permit access to the GPON Device. MAC addresses not listed cannot access
to the GPON Device.
SSID Select Select the SSID for which you want to configure MAC filter settings.
Enable MAC
Filter
Select the check box to enable MAC address filtering for the selected SSID.
#
This is the index number of the MAC address.
MAC Address Enter the MAC addresses of the wireless devices that are allowed access to the GPON Device
in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
To Next Page
Loading...
