Chapter 5 LAN
PMG5318-B20A User’s Guide
43
The following table describes the labels in this screen.
Table 12 Port Speed
LABEL DESCRIPTION
LAN Port This column displays the LAN port number.
Speed Select Autonegotiation to have the GPON Device automatically use 1G, 100M or
10M depending on the device connected to the port. You can also manually select one
of these speeds.
Duplex Select Auto to have the GPON Device automatically use full or half duplex depending
on the device connected to the port. You can also manually select a Full or Half
duplex.
Apply Click Apply to save the changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
