ZyXEL Communications UAG4100 - View AP Log

Chapter 7 Monitor
UAG4100 User’s Guide
101
The Web Configurator saves the filter settings if you leave the View Log screen and return to it
later.
7.17.1 View AP Log
Use this screen to view the UAG’s current wireless AP log messages. Click Monitor > Log > View
AP Log to access this screen.
Figure 67 Monitor > Log > View AP Log
Source This field displays the source IP address and the port number in the event that generated
the log message.
Destination This field displays the destination IP address and the port number of the event that
generated the log message.
Note This field displays any additional information about the log message.
Table 41 Monitor > Log (continued)
LABEL DESCRIPTION