Chapter 4 Installation Setup Wizard
UAG4100 User’s Guide
45
Refer to information provided by your ISP to know what to enter in each field. Leave a field blank if
you don’t have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 20 Internet Access: Step 1
• Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet.
Otherwise, choose PPP Over Ethernet (PPPoE) or PPTP for a dial-up connection according to
the information from your ISP.
• First WAN Interface: This is the interface you are configuring for Internet access.
• Zone: This is the security zone to which this interface and Internet connection belong.
• IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address.
Select Static if the ISP assigned a fixed IP address.
4.2.1 Internet Settings: Ethernet
This screen is read-only if you set the previous screen’s IP Address Assignment field to Auto and
click Next. Use this screen to configure your IP address settings.
Note: Enter the Internet access information exactly as given to you by your ISP.
To Next Page
Loading...
